Trosolwg
Peiriannydd Siartredig (CEng)
Cymrawd Sefydliad y Peirianwyr Mecanyddol (FIMechE)
Cymrawd Sefydliad y Dylunwyr Peirianneg (FIED)
Tystysgrif mewn Addysg (CertEd)
Yr Athro Stephen Hardy
Athro Emeritws (Peirianneg),
Science and Engineering
Cyhoeddiadau
Uchafbwyntiau Ymchwil
-
Sadowski, T., Hardy, S., Postek, E., & Hardy, S. (2006). A new model for the time-dependent behaviour of polycrystalline ceramics with metallic inter-granular layers under tension. , 230-238.
-
Alipour, R., Hardy, S., Gowhari-Anaraki, A., & Hardy, S. (2005). Spot-welded joints subjected to shear-tension loading. Part 2: mixed-mode fracture parameters. , 755-773.
-
Pipelzadeh, M., Gowhari-Anaraki, A., Hardy, S., & Hardy, S. (2001). Upper and lower bound limit and shakedown loads for hollow tubes with axisymmetric internal projections under axial loading. , 595-604.
-
Abdusslam, R., Hardy, S., & Hardy, S. (2007). Finite element modelling of the manufacturing process for aluminium aerosol cans. , 265-274.
-
Hardy, S. (2009). Upper and Lower Bound Limit Loads for Thin-Walled Pressure Vessels Used for Aerosol Cans. Advances in Mechanical Engineering
-
Hardy, S. (2010). The Effect of Stiffness on Stress Intensity Factor for a Crack in Annular Disc Under Constant Central Torque. International Journal of Damage Mechanics
-
Majzoobi, G., Bakhtiari, H., Atrian, A., Pipelzadeh, M., Hardy, S., & Hardy, S. (2016). Warm dynamic compaction of Al6061/SiC nanocomposite powders. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(2), 375-387.
-
Majzoobi, G., Fariba, F., Pipelzadeh, M., & Hardy, S. (2015). A new approach for the correction of stress–strain curves after necking in metals. The Journal of Strain Analysis for Engineering Design, 50(2), 125-137.
-
Majzoobi, G., Dabbagh, M., Asgari, P., Pipelzadeh, M., Hardy, S., & Hardy, S. (2014). Improvement of performance of bolt-nut connections, Part I: Simulations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(17), 3069-3077.
-
Majzoobi, G., Dabbagh, M., Asgari, P., Pipelzadeh, M., Hardy, S., & Hardy, S. (2014). Improvement of performance of bolt–nut connections, Part II: Experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(17), 3078-3089.
Holl Ymchwil
Erthyglau Cylchgronau
-
Majzoobi, G., Bakhtiari, H., Atrian, A., Pipelzadeh, M., Hardy, S., & Hardy, S. (2016). Warm dynamic compaction of Al6061/SiC nanocomposite powders. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230(2), 375-387.
-
Majzoobi, G., Fariba, F., Pipelzadeh, M., & Hardy, S. (2015). A new approach for the correction of stress–strain curves after necking in metals. The Journal of Strain Analysis for Engineering Design, 50(2), 125-137.
-
Majzoobi, G., Dabbagh, M., Asgari, P., Pipelzadeh, M., Hardy, S., & Hardy, S. (2014). Improvement of performance of bolt-nut connections, Part I: Simulations. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(17), 3069-3077.
-
Majzoobi, G., Dabbagh, M., Asgari, P., Pipelzadeh, M., Hardy, S., & Hardy, S. (2014). Improvement of performance of bolt–nut connections, Part II: Experimental investigation. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228(17), 3078-3089.
-
Majzoobi, G., Hosseinkhani, A., Lahmi, S., Pipelzadeh, M., & Hardy, S. (2014). Determination of the constants of material models at high strain rates and elevated temperatures using shot impact test. The Journal of Strain Analysis for Engineering Design, 49(5), 342-351.
-
Hardy, S. (2010). The Effect of Stiffness on Stress Intensity Factor for a Crack in Annular Disc Under Constant Central Torque. International Journal of Damage Mechanics
-
Hardy, S. (2009). Upper and Lower Bound Limit Loads for Thin-Walled Pressure Vessels Used for Aerosol Cans. Advances in Mechanical Engineering
-
Abdusslam, R., Hardy, S., & Hardy, S. (2007). Finite element modelling of the manufacturing process for aluminium aerosol cans. , 265-274.
-
Sadowski, T., Hardy, S., Postek, E., & Hardy, S. (2006). A new model for the time-dependent behaviour of polycrystalline ceramics with metallic inter-granular layers under tension. , 230-238.
-
Alipour, R., Hardy, S., Gowhari-Anaraki, A., & Hardy, S. (2005). Spot-welded joints subjected to shear-tension loading. Part 2: mixed-mode fracture parameters. , 755-773.
-
Pipelzadeh, M., Gowhari-Anaraki, A., Hardy, S., & Hardy, S. (2001). Upper and lower bound limit and shakedown loads for hollow tubes with axisymmetric internal projections under axial loading. , 595-604.