Dr Nidhal Jamia

Darlithydd mewn Peirianneg Awyrofod, Aerospace Engineering

nidhal.jamia@abertawe.ac.uk

333
Trydydd Llawr
Adeilad Gogleddol Peirianneg
Campws y Bae

Ar gael ar gyfer Goruchwyliaeth Ôl-raddedig

Dolenni Ymchwil

https://orcid.org/0000-0003-0643-7812

ResearchGate

ResearcherID

Scopus

Trosolwg

Mae Dr Jamia yn ddarlithydd Peirianneg Awyrofod yn y Brifysgol sy'n arbenigo mewn Peirianneg Awyrofod a Mecanyddol. Mae prif ddiddordebau ymchwil Dr Jamia ym meysydd cymhleth Dynameg Strwythurol Llinellol ac Aflinol, Dirgryniadau Llafnau Peiriannau Tyrbo a Dadansoddi Moddol Arbrofol. Mae rhan sylweddol o'i waith yn ymroddedig i archwilio strwythurau wedi'u huniadu a dylunio a phrofi rhyngwynebau ffrithiannol yn arbrofol. Mae arbenigedd Dr Jamia yn ymestyn i ymateb dynamig uniadau bolltog, lle mae ef wedi datblygu hyfedredd sylweddol wrth ragfynegi a deall y rhyngweithiadau cymhleth sy'n gweithredu yn y systemau hyn. Mae ei ymchwil wedi cyfrannu at wybodaeth academaidd ond hefyd mae ganddi oblygiadau ymarferol o ran rheoli dirgryniadau a chyfanrwydd strwythurol ym maes peirianneg awyrofod. Mae Dr Jamia yn ymroddedig i wella dealltwriaeth o'r agweddau hollbwysig hyn, gan sicrhau eu bod yn atseinio yn y gymuned academaidd ond hefyd mewn cymwysiadau peirianneg ymarferol.

Meysydd Arbenigedd

Strwythurau wedi'u huniadu
Dynameg Strwythurol Aflinol
Profi Moddol Aflinol
Dadansoddi dirgryniadau
Mecaneg Strwythurol
Dirgryniadau Llafnau Peiriannau Tyrbo

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Rajendran, P., Jamia, N., Friswell, M., & El-Borgi, S. (2017). Identification of Mistuned Blades using Wavelet Transform. In The Second International Computational Science and Engineering Conference (ICSEC17)
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65278
Jamia, N. & Friswell, M. (2016). The Effect of Sensor Characteristics on Blade Tip Timing Measurements. In Vibration in Rotating Machinery - VIRM 11At: Schuster Building, University of Manchester, Manchester
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65277
Friswell, M., Fernandes, R., Jamia, N., & El-Borgi, S. (2016). Identification of Breathing Cracked Shaft Models from Measurements. In Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics & Laser Vibrometry, Volume 8 (pp. 537-543). Springer International Publishing.
https://doi.org/10.1007/978-3-319-30084-9_47, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65276
Jamia, N., Jamia, N., Friswell, M., El-Borgi, S., & Fernandes, R. (2018). Simulating eddy current sensor outputs for blade tip timing. Advances in Mechanical Engineering, 10(1), 168781401774802
https://doi.org/10.1177/1687814017748020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38762
Jamia, N., Jamia, N., Friswell, M., El-Borgi, S., & Rajendran, P. (2019). Modelling and experimental validation of active and passive eddy current sensors for blade tip timing. Sensors and Actuators A: Physical, 285, 98-110.
https://doi.org/10.1016/j.sna.2018.10.034, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa46100
Rajendran, P., Jamia, N., El-Borgi, S., & Friswell, M. (2018). Wavelet Transform-Based Damage Identification in Bladed Disks and Rotating Blades. Shock and Vibration, 2018, 1-16.
https://doi.org/10.1155/2018/3027980, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48991
Taghipour, J., Haddad Khodaparast, H., Friswell, M., Jalali, H., Madinei, H., & Jamia, N. (2021). On the sensitivity of the equivalent dynamic stiffness mapping technique to measurement noise and modelling error. Applied Mathematical Modelling, 89(1), 225-248.
https://doi.org/10.1016/j.apm.2020.07.062, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54985
Jamia, N., Friswell, M., El-Borgi, S., & Rajendran, P. (2018). Simulating Eddy Current Sensors in Blade Tip Timing Application: Modeling and Experimental Validation. In ASME 2018 International Mechanical Engineering Congress and ExpositionAmerican Society of Mechanical Engineers.
https://doi.org/10.1115/imece2018-87414, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55821
Jamia, N., Rajendran, P., El-Borgi, S., & Friswell, M. (2018). Mistuning identification in a bladed disk using wavelet packet transform. Acta Mechanica, 229(3), 1275-1295.
https://doi.org/10.1007/s00707-017-2059-1, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55822
Fernandes, R., El-Borgi, S., Ahmed, K., Friswell, M., & Jamia, N. (2016). Static fracture and modal analysis simulation of a gas turbine compressor blade and bladed disk system. Advanced Modeling and Simulation in Engineering Sciences, 3(1)
https://doi.org/10.1186/s40323-016-0083-7, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55824

Holl Ymchwil

Erthyglau Cylchgronau

Jalali, H., Jamia, N., Friswell, M., Haddad Khodaparast, H., & Taghipour, J. (2022). A generalization of the Valanis model for friction modelling. Mechanical Systems and Signal Processing, 179, 109339
https://doi.org/10.1016/j.ymssp.2022.109339, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60202
Bonney, M., Bonney, M., Angelis, M., Borgo, M., Andrade, L., Beregi, S., Jamia, N., & Wagg, D. (2022). Development of a digital twin operational platform using Python Flask. Data-Centric Engineering, 3
https://doi.org/10.1017/dce.2022.1, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa60730
Taghipour, J., Haddad Khodaparast, H., Friswell, M., Shaw, A., Jalali, H., & Jamia, N. (2022). Harmonic-Balance-Based parameter estimation of nonlinear structures in the presence of Multi-Harmonic response and force. Mechanical Systems and Signal Processing, 162, 108057
https://doi.org/10.1016/j.ymssp.2021.108057, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa56936
Jamia, N., Jalali, H., Taghipour, J., Friswell, M., & Haddad Khodaparast, H. (2021). An equivalent model of a nonlinear bolted flange joint. Mechanical Systems and Signal Processing, 153, 107507
https://doi.org/10.1016/j.ymssp.2020.107507, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55840
Taghipour, J., Haddad Khodaparast, H., Friswell, M., Jalali, H., Madinei, H., & Jamia, N. (2021). On the sensitivity of the equivalent dynamic stiffness mapping technique to measurement noise and modelling error. Applied Mathematical Modelling, 89(1), 225-248.
https://doi.org/10.1016/j.apm.2020.07.062, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa54985
Jamia, N., Jamia, N., Friswell, M., El-Borgi, S., & Rajendran, P. (2019). Modelling and experimental validation of active and passive eddy current sensors for blade tip timing. Sensors and Actuators A: Physical, 285, 98-110.
https://doi.org/10.1016/j.sna.2018.10.034, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa46100
Jamia, N., Jamia, N., Friswell, M., El-Borgi, S., & Fernandes, R. (2018). Simulating eddy current sensor outputs for blade tip timing. Advances in Mechanical Engineering, 10(1), 168781401774802
https://doi.org/10.1177/1687814017748020, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa38762
Rajendran, P., Jamia, N., El-Borgi, S., & Friswell, M. (2018). Wavelet Transform-Based Damage Identification in Bladed Disks and Rotating Blades. Shock and Vibration, 2018, 1-16.
https://doi.org/10.1155/2018/3027980, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa48991
Jamia, N., Rajendran, P., El-Borgi, S., & Friswell, M. (2018). Mistuning identification in a bladed disk using wavelet packet transform. Acta Mechanica, 229(3), 1275-1295.
https://doi.org/10.1007/s00707-017-2059-1, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55822
Fernandes, R., El-Borgi, S., Ahmed, K., Friswell, M., & Jamia, N. (2016). Static fracture and modal analysis simulation of a gas turbine compressor blade and bladed disk system. Advanced Modeling and Simulation in Engineering Sciences, 3(1)
https://doi.org/10.1186/s40323-016-0083-7, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55824
Jamia, N., El-Borgi, S., Fernandes, R., & Vegamoor, V. (2016). Analysis of an arbitrarily oriented crack in a functionally graded plane using a non-local approach. Theoretical and Applied Fracture Mechanics, 85, 387-397.
https://doi.org/10.1016/j.tafmec.2016.05.001, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55825

Cyfraniadau Cynadleddau

Jamia, N., Bonney, M., Jalali, H., Friswell, M., Haddad Khodaparast, H., & Mills, R. (2023). Experimental Investigation on Frictional Interfaces of a Bolted Flange System. In Nonlinear Structures and Systems (pp. 185-188). Springer Nature Switzerland.
https://doi.org/10.1007/978-3-031-36999-5_23, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65026
Jamia, N., Jalali, H., Friswell, M., Haddad Khodaparast, H., & Taghipour, J. (2021). Modelling the Effect of Preload in a Lap-Joint by Altering Thin-Layer Material Properties. In Nonlinear Structures and Systems, Volume 1 (pp. 211-217). Springer International Publishing.
https://doi.org/10.1007/978-3-030-77135-5_25, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65182
Jamia, N., Jalali, H., Taghipour, J., Friswell, M., & Haddad Khodaparast, H. (2020). Nonlinear Dynamic Analysis of Bolted Joints: Detailed and Equivalent Modelling. In Nonlinear Structures & Systems, Volume 1 (pp. 215-221). Springer International Publishing.
https://doi.org/10.1007/978-3-030-47626-7_31, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65178
Jamia, N., TAGHIPOUR, J., Jalali, H., Friswell, M., Haddad Khodaparast, H., & Shaw, A. (2020). Numerical and experimental investigations of nonlinearities in bolted joints. In Proceedings of the International Conference on Noise and Vibration Engineering (ISMA2020) (pp. 1199-1213).
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65181
Jamia, N., Jalali, H., Friswell, M., Haddad Khodaparast, H., & Taghipour, J. (2020). Identification of Bolted Joint Models Using a Stochastic Thin Layer. In The 4th International Conference on Uncertainty Quantification in Computational Sciences and Engineering
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65179
Jamia, N., Friswell, M., El-Borgi, S., & Rajendran, P. (2018). Simulating Eddy Current Sensors in Blade Tip Timing Application: Modeling and Experimental Validation. In ASME 2018 International Mechanical Engineering Congress and ExpositionAmerican Society of Mechanical Engineers.
https://doi.org/10.1115/imece2018-87414, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa55821
Jamia, N., Friswell, M., El-Borgi, S., & Rajendran, P. (2018). Blade tip timing based condition monitoring of bladed disks in rotating machines. In PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2018) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2018) (pp. 955-969). KATHOLIEKE UNIV LEUVEN, DEPT WERKTUIGKUNDECELESTIJNENLAAN 300B, HEVERLEE, B-3001, BELGIUM.
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65180
https://www.webofscience.com/wos/woscc/full-record/WOS:000467299101022?SID=EUW1ED0E6EXIjQqrC7ORpvTiISuWQ
Rajendran, P., Jamia, N., Friswell, M., & El-Borgi, S. (2017). Identification of Mistuned Blades using Wavelet Transform. In The Second International Computational Science and Engineering Conference (ICSEC17)
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65278
Jamia, N. & Friswell, M. (2016). The Effect of Sensor Characteristics on Blade Tip Timing Measurements. In Vibration in Rotating Machinery - VIRM 11At: Schuster Building, University of Manchester, Manchester
SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65277
Friswell, M., Fernandes, R., Jamia, N., & El-Borgi, S. (2016). Identification of Breathing Cracked Shaft Models from Measurements. In Rotating Machinery, Hybrid Test Methods, Vibro-Acoustics & Laser Vibrometry, Volume 8 (pp. 537-543). Springer International Publishing.
https://doi.org/10.1007/978-3-319-30084-9_47, SU Repository: https://cronfa.swan.ac.uk/Record/cronfa65276

Modiwlau a Addysgir

EG-110 Engineering Skills & Applications

Competence in engineering drawing using an industry standard CAD system and essential laboratory skills for Mechanical Engineers.
EG-114 Engineering Mathematics 1 (Mech & EEE & Engineering)

This module (in combination with Engineering Analysis 2B) provides the essential grounding in mathematical analysis techniques for engineering students. This module ensures that all students have a suitable level of analytical skills for subsequent engineering modules.
EG-115 Engineering Mathematics 2 (Aero & Civil)

Module Aims: this module (in combination with Engineering Analysis 1A) provides further grounding in mathematical analysis techniques for Engineering students. The module extends the understanding into more complex analytical methods, focusing on Taylor series, ordinary differential equations, complex numbers, vector algebra and multi-variable functions.
EG-163 Design and Laboratory Classes 1

Competence in engineering drawing using an industry standard CAD system and essential laboratory skills

Hanes Gyrfa

Darlithydd Peirianneg Awyrofod, Prifysgol Abertawe

Rhagfyr 2023 - Presennol
Tiwtor Peirianneg Awyrofod, Prifysgol Abertawe

Medi 2023 - Hydref 2023
Swyddog Ymchwil, Y Gyfadran Gwyddoniaeth a Pheirianneg, Prifysgol Abertawe

Gorffennaf 2022 - Medi 2023
Cynorthwy-ydd Ymchwil, Y Gyfadran Gwyddoniaeth a Pheirianneg, Prifysgol Abertawe

Chwefror 2019 - Mehefin 2022
PhD mewn Peirianneg Fecanyddol, Swansea University

2015 - 2019
MSc mewn Mecaneg Gyfrifiadol, Ysgol Polytechnig Tiwnisia, Tiwnisia

2010 - 2014
BEng mewn Peirianneg Sifil, Ysgol Peirianneg Gabes, Tiwnisia

2005 - 2010

Dr Nidhal Jamia

Cyfeiriad ebost

LinkedIn Account

Dolenni Ymchwil

Trosolwg

Meysydd Arbenigedd

Cyhoeddiadau

Uchafbwyntiau Ymchwil

Holl Ymchwil

Erthyglau Cylchgronau

Cyfraniadau Cynadleddau

Modiwlau a Addysgir

EG-110 Engineering Skills & Applications

EG-114 Engineering Mathematics 1 (Mech & EEE & Engineering)

EG-115 Engineering Mathematics 2 (Aero & Civil)

EG-163 Design and Laboratory Classes 1

Hanes Gyrfa

Darlithydd Peirianneg Awyrofod, Prifysgol Abertawe

Tiwtor Peirianneg Awyrofod, Prifysgol Abertawe

Swyddog Ymchwil, Y Gyfadran Gwyddoniaeth a Pheirianneg, Prifysgol Abertawe

Cynorthwy-ydd Ymchwil, Y Gyfadran Gwyddoniaeth a Pheirianneg, Prifysgol Abertawe

PhD mewn Peirianneg Fecanyddol, Swansea University

MSc mewn Mecaneg Gyfrifiadol, Ysgol Polytechnig Tiwnisia, Tiwnisia

BEng mewn Peirianneg Sifil, Ysgol Peirianneg Gabes, Tiwnisia