Publications

Journal Articles

  1. Potts, S., Phillips, C., Jewell, E., Clifford, B., Lau, Y., Claypole, T. High-speed imaging the effect of snap-off distance and squeegee speed on the ink transfer mechanism of screen-printed carbon pastes Journal of Coatings Technology and Research
  2. Claypole, T., Kilduff, L., Claypole, J., Holder, A. Effect of phase volume of GNP on the rheology of functional inks Journal of Coatings Technology and Research
  3. Claypole, A., Claypole, J., Holder, A., Claypole, T., Kilduff, L. Rheology of high-aspect-ratio nanocarbons dispersed in a low-viscosity fluid Journal of Coatings Technology and Research
  4. Ippolito, F., Rentsch, S., Hübner, G., Claypole, T., Gane, P. Influence of calcium carbonate on polyamide 12 regarding melting, formability and crystallization properties Composites Part B: Engineering 164 158 167
  5. Potts, S., Lau, Y., Dunlop, T., Claypole, T., Phillips, C., Claypole, T., Phillips, C. Effect of photonic flash annealing with subsequent compression rolling on the topography, microstructure and electrical performance of carbon-based inks Journal of Materials Science 54 11 8163 8176
  6. Rassek, P., Steiner, E., Herrenbauer, M., Claypole, T. The effect of electrode calendering on the performance of fully printed Zn∣MnO2 batteries Flexible and Printed Electronics 4 3 035003
  7. Holder, A., Claypole, J., Claypole, T., Cooper, P., Williams, P., Curtis, D., Williams, R., Claypole, T., Curtis, D. Fourier Transform Controlled Stress Parallel Superposition (FT-CSPS): Validation and application in processing printable functional materials Physics of Fluids 30 7 077105
  8. Phillips, C., Al-Ahmadi, A., Potts, S., Claypole, T., Deganello, D., Claypole, T., Phillips, C. The effect of graphite and carbon black ratios on conductive ink performance Journal of Materials Science 52 16 9520 9530
  9. Thomas, D., McCall, C., Tehrani, Z., Claypole, T., Claypole, T. Three-Dimensional–Printed Laboratory-on-a-Chip With Microelectronics and Silicon Integration Point of Care: The Journal of Near-Patient Testing & Technology 16 2 97 101
  10. Tomašegović, T., Beynon, D., Claypole, T., Poljaček, S., Claypole, T. Tailoring the properties of deposited thin coating and print features in flexography by application of UV-ozone treatment Journal of Coatings Technology and Research 13 5 815 828
  11. Mogg, B., Claypole, T., Deganello, D., Phillips, C., Claypole, T., Phillips, C. Flexographic printing of ultra-thin semiconductor polymer layers Translational Materials Research 3 1 015001
  12. Tehrani, Z., Korochkina, T., Govindarajan, S., Thomas, D., O’Mahony, J., Kettle, J., Claypole, T., Gethin, D., Gethin, D., Claypole, T., Tehrani, Z. Ultra-thin flexible screen printed rechargeable polymer battery for wearable electronic applications Organic Electronics 26 386 394
  13. Jewell, E., Hamblyn, S., Claypole, T., Gethin, D., Claypole, T. Deposition of High Conductivity Low Silver Content Materials by Screen Printing Coatings 5 2 172 185
  14. Phillips, C., Beynon, D., Hamblyn, S., Davies, G., Gethin, D., Claypole, T. A Study of the Abrasion of Squeegees Used in Screen Printing and Its Effect on Performance with Application in Printed Electronics Coatings 4 2 356 379
  15. Phillips, C., Parthaláin, N., Syed, Y., Deganello, D., Claypole, T., Lewis, K. Short-Term Intra-Subject Variation in Exhaled Volatile Organic Compounds (VOCs) in COPD Patients and Healthy Controls and Its Effect on Disease Classification Metabolites 4 2 300 318
  16. Jewell, E., Gethin, D., Claypole, T., Jewell, E. The impact of carbon content and mesh on the characteristics of screen printed conductive structures Circuit World 39 1 13
  17. Thompson, A., Meah, D., Ahmed, N., Conniff-Jenkins, R., Chileshe, E., Phillips, C., Claypole, T., Forman, D., Row, P., Claypole, T., Phillips, C., Forman, D. Comparison of the antibacterial activity of essential oils and extracts of medicinal and culinary herbs to investigate potential new treatments for irritable bowel syndrome BMC Complementary and Alternative Medicine 13 1 338
  18. Cherrington, M., Claypole, T., Gethin, D., Worsley, D., Deganello, D., Claypole, T., Deganello, D., Worsley, D. Non-contact assessment of electrical performance for rapidly sintered nanoparticle silver coatings through colorimetry Thin Solid Films 522 412 414
  19. Phillips, C., Syed, Y., Parthaláin, N., Zwiggelaar, R., Claypole, T., Lewis, K., Claypole, T., Phillips, C. Machine learning methods on exhaled volatile organic compounds for distinguishing COPD patients from healthy controls Journal of Breath Research 6 3 036003
  20. Phillips, C., Govindarajan, S., Hamblyn, S., Conlan, R., Gethin, D., Claypole, T., Claypole, T., Conlan, S. Patterning of Antibodies Using Flexographic Printing Langmuir 28 25 9878
  21. Bould, D., Hamblyn, S., Gethin, D., Claypole, T., Claypole, T. Effect of impression pressure and anilox specification on solid and halftone density Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 255 5 699 709
  22. Gethin, D., Claypole, T., Deganello, D. Patterning of micro-scale conductive networks using reel-to-reel flexographic printing Thin Solid Films
  23. Gethin, D., Claypole, T., Phillips, C. Finite element modelling of low temperature forming of polymer films with application in in-mould decoration Materials & Design
  24. Gethin, D., Claypole, T., Phillips, C. Mechanical properties of polymer films used in in-mould decoration Journal of Materials Processing Technology
  25. Gethin, D., Claypole, T., Jewell, E. Experimental and numerical investigation into nonlinear deformation of silicone rubber pads during ink transfer process Polymer Testing
  26. Gethin, D., Claypole, T., Jewell, E., Phillips, C. Development of measurement techniques to characterize the optical properties of transparent films with application in in-mould decoration Measurement Science and Technology
  27. Bohan, M., Claypole, T., Bould, D., Claypole, T. An Investigation into plate deformation in flexographic printing 1499 1511
  28. Gethin, D., Claypole, T., Fox, I., Bohan, M., Claypole, T. Influence of non-Newtonian fluids on the performance of a soft elastohydrodynamic nip contact with surface roughness 447 459

Book Chapters

  1. Thomas, D., Claypole, T. 3-D Printing (Ed.), Printing on Polymers 293 306 Elsevier

Conference Contributions

  1. Claypole, J., Holder, A., McCall, C., Winters, A., Ray, W., Claypole, T. Inorganic printed LEDs for wearable technology Advances in Printing and Media Technology - Proceedings of the 46th International Research Conference of iarigai 150 155
  2. Claypole, A., Claypole, T. Flexible and stretchable inks for wearable applications Advances in Printing and Media Technology - Proceedings of the 46th International Research Conference of iarigai
  3. Potts, S., Phillips, C., Claypole, T. High speed imaging of ink separation in screen-printing Advances in Printing and Media Technology - Proceedings of the 46th International Research Conference of iarigai XLVI(VI) 8 15