Publications

Journal Articles

  1. Bache, M., Davies, H., Davey, W., Thomas, M., Berment-Parr, I. Microstructural Control of Fatigue Behaviour in a Novel a+b Titanium Alloy Metals
  2. Quiney, Z., Weston, E., Nicholson, P., Pattison, S., Bache, M. Volumetric assessment of fatigue damage in a SiCf/SiC ceramic matrix composite via in situ X-ray computed tomography Journal of the European Ceramic Society 40 11 3788 3794
  3. Bache, M., Davies, H., Davey, ., Thomas, ., Berment-Parr, . Microstructural Control of Fatigue Behaviour in a Novel α + β Titanium Alloy Metals 9 11 1200
  4. Davey, W., Bache, M., Davies, H., Thomas, M. Fatigue Performance of the Novel Titanium Alloy Timetal 407 MATEC Web of Conferences 165 04001
  5. Bache, M., Coleman, C., Coleman, M., Gray, V., Boettcher, C. Microstructure evolution in flow formed IN 718 products and subsequent fatigue crack growth properties Fatigue & Fracture of Engineering Materials & Structures 41 11 2249 2258
  6. Jones, J., Whittaker, M., Buckingham, R., Johnston, R., Bache, M., Clark, D. Microstructural characterisation of a nickel alloy processed via blown powder direct laser deposition (DLD) Materials & Design 117 47 57
  7. Li, Y., Dixon, M., Ortiz, J., Bache, M., Bache, M. Fatigue assessment of Ti-45Al-2Mn-2NbXD sub-element specimens Intermetallics 80 33 39
  8. Coleman, C., Bache, M., Boettcher, C. Fatigue Crack Growth in Flow Formed INCONEL 718 Materials Science Forum 879 374 379
  9. Hurst, R., Lancaster, R., Jeffs, S., Bache, M. The contribution of small punch testing towards the development of materials for aero-engine applications Theoretical and Applied Fracture Mechanics 86 69 77
  10. Abdallah, Z., Ding, R., Martin, N., Dixon, M., Bache, M. Creep deformation mechanisms in a γ titanium aluminide Materials Science and Engineering: A 673 616 623
  11. Bache, M., O’Hanlon, J., Withers, P., Child, D., Hardy, M. Characterisation of an Advanced Nickel Based Superalloy Post Cold Work by Swaging Metals 6 3 54
  12. Bache, M., O’Hanlon, J., Child, D., Hardy, M. High temperature fatigue behaviour in an advanced nickel based superalloy: The effects of oxidation and stress relaxation at notches Theoretical and Applied Fracture Mechanics 84 64 71
  13. Salvo, D., Sackett, E., Johnston, R., Thompson, D., Andrews, P., Bache, M. Mechanical characterisation of a fibre reinforced oxide/oxide ceramic matrix composite Journal of the European Ceramic Society 35 16 4513 4520
  14. Ardi, D., Li, Y., Chan, K., Blunt, L., Bache, M. Surface topography and the impact on fatigue performance Surface Topography: Metrology and Properties 3 1 015007
  15. Hewitt, J., Davies, P., Thomas, M., Garratt, P., Bache, M. Titanium alloy developments for aeroengine fan systems Materials Science and Technology 30 15 1919 1924
  16. Ardi, D., Li, Y., Chan, K., Blunt, L., Bache, M. The Effects of Machined Topography on Fatigue Life of a Nickel based Superalloy Procedia CIRP 13 19 24
  17. Ardi, D., Li, Y., Chan, K., Bache, M. Surface Roughness, Areal Topographic Measurement, and Correlation to LCF Behavior in a Nickel-Based Superalloy Journal of Materials Engineering and Performance 23 10 3657 3665
  18. Achintha, M., Nowell, D., Fufari, D., Sackett, E., Bache, M., Bache, M. Fatigue behaviour of geometric features subjected to laser shock peening: Experiments and modelling International Journal of Fatigue
  19. Achintha, M., Nowell, D., Fufari, D., Sackett, E., Bache, M., Bache, M., Sackett, E. Fatigue behaviour of geometric features subjected to laser shock peening: experiments and modelling International Journal of Fatigue
  20. Bache, M., Johnston, R., Cook, T., Robinson, B., Matlik, J., Bache, M., Johnston, R. Crack growth in the creep-fatigue regime under constrained loading of thin sheet combustor alloys International Journal of Fatigue 42 82 87
  21. Bache, M. Microstructure and Mechanical Properties of an Advanced Nickel-Based Superalloy in the as-HIP Form Advanced Materials Research 278 265 270
  22. Bache, M., Morgans, C., Bache, M. Domestic object damage and fatigue behaviour of an advanced gamma TiAl alloy Intermetallics 19 6 782 786
  23. Bache, M. The use of coupled nonlocal damage-plasticity to predict crack growth in ductile metal plates Engineering Fracture Mechanics
  24. Bache, M. 25 Year Perspective. Recent developments in analysis of high temperature creep and creep fracture behaviour Materials Science and Technology
  25. Madrigal, C., Dunne, F., Bache, M., Bache, M. Experimental and crystal plasticity studies of deformation and crack nucleation in a titanium alloy The Journal of Strain Analysis for Engineering Design 45 5 391 399
  26. Clark, D., Bache, M., Whittaker, M. Microstructural Characterization of a Polycrystalline Nickel-Based Superalloy Processed via Tungsten-Intert-Gas-Shaped Metal Deposition Metallurgical and Materials Transactions B 41 6 1346 1353
  27. Bache, M. Environment and time dependent effects on the fatigue response of an advanced nickel based superalloy International Journal of Fatigue
  28. Bache, M. Novel low cost procedure for fabrication of diffusion bonds in Ti 6/4 Materials Science and Technology
  29. Wilshire, B., Bache, M., Bache, M. Creep of monolithic and fibre-reinforced silicon carbide Journal of the European Ceramic Society 28 7 1535 1542
  30. Clark, D., Bache, M., Whittaker, M., Bache, M., Whittaker, M. Shaped metal deposition of a nickel alloy for aero engine applications Journal of Materials Processing Technology 203 1-3 439 448
  31. Bache, M. Creep damage resistance of ceramic–matrix composites Journal of the European Ceramic Society 4603 4611
  32. Tuppen, S., Bache, M., Voice, W., Bache, M. A Fatigue Assessment of Dissimilar Titanium Alloy Diffusion Bonds 651 658
  33. Bache, M., Bradshaw, C., Voice, W., Bache, M. Characterisation of foreign object damage and fatigue strength in titanium based aerofoil alloys 199 206
  34. BACHE, M., Bache, M. A review of dwell sensitive fatigue in titanium alloys: the role of microstructure, texture and operating conditions 1079 1089

Conference Contributions

  1. Newton, C., Jones, J., Gale, L., Bache, M. Detection of Strain and Damage Distribution in SiCf/SiC Mechanical Test Coupons ASME Proceedings: Ceramics V006T02A004
  2. Bache, M., Nicholson, P., Williams, E., Bache, M. In-Situ Assessment of Fracture in SiCf/SiC Under Computed X-Ray Tomography ASME Proceedings: Ceramics V006T02A005
  3. Newton, C., Jones, J., Chamberlain, A., Bache, M. Inhomogeneous Strain Distribution in SiCf/SiC Coupons Under Tensile Loading ASME Proceedings: Ceramics V006T02A001
  4. Bache, M., Jones, J., Quiney, Z., Gale, L. Damage Development in SiCf/SiC Composites Through Mechanical Loading ASME Proceedings: Ceramics V006T02A006
  5. Thomas, M., Hewitt, J., Bache, M., Thomas, R., Garratt, P. DETERMINATION AND ANALYSIS OF THE CYCLIC AND DWELL FATIGUE PERFORMANCE OF TIMETAL 575 World Titanium Conference, San Diego, August 2015
  6. Quiney, Z., Jones, P., Bache, M. Inspection of SiCf/SiC Ceramic Matrix Composite Specimens Employed for Thermo-mechanical Fatigue Experiments via Laboratory X-ray Computed Microtomography 7th International Symposium on NDT in Aerospace, Germany, 2015
  7. Owen, R., Hurst, R., Dixon, M., Martin, N., Bache, M. Mechanical characterisation of Gamma Titanium Aluminides utilising a miniaturised test technique World Titanium Conference, San Diego, August 2015
  8. Thomas, M., Hewitt, J., Bache, M., Thomas, R., Garratt, P., Kosaka, Y. TIMETAL 575: A novel high strength forgeable α/β Titanium Alloy World Titanium Conference, San Diego, August 2015
  9. Adams, J., Hurst, R., Borradaille, B., Bache, M. Ductile-brittle transition characterisation of NESC-I spinning cylinder steel using the small punch test SMiRT-23, 23rd conference on Structural Mechanics in Reactor Technology, Manchester, Aug 2015
  10. Adams, J., Hurst, R., Borradaille, B., Bache, M. Influence of specimen geometry and strain rate on ductile brittle transition characterisation of reactor pressure vessel steels using the small punch technique Proc. of the ASME 2015 Pressure Vessels and Piping Conference PVP2015
  11. O'Hanlon, J., Hardy, M., Child, D., Foss, B., Withers, P., Bache, M. The effect of minimum dwell cycles on the environmental and fatigue response of RR1000 EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications MATEC Web of Conferences Volume 14, 2014 04003