Journal Articles

  1. Elrefaey, A., Gu, Y., James, J., Kneen, C., Crabbe, I., Sienz, J. An investigation of the failure mechanisms of lead anodes in copper electrowinning cells Engineering Failure Analysis 108 104273
  2. Ramos, D., Belblidia, F., Sienz, J. New scanning strategy to reduce warpage in additive manufacturing Additive Manufacturing
  3. Sienz, J. An Augmented Reality Based Human-Robot Interaction Interface Using Kalman Filter Sensor Fusion Sensors 19 20 4586
  4. Li, C., Fahmy, A., Sienz, J. Development of a Neural Network-Based Control System for the DLR-HIT II Robot Hand Using Leap Motion IEEE Access 7 136914 136923
  5. Philo, A., Mehraban, S., Holmes, M., Sillars, S., Sutcliffe, C., Sienz, J., Brown, S., Lavery, N., Brown, S., Sienz, J., Lavery, N. A pragmatic continuum level model for the prediction of the onset of keyholing in laser powder bed fusion The International Journal of Advanced Manufacturing Technology
  6. Sillars, S., Sutcliffe, C., Philo, A., Brown, S., Sienz, J., Lavery, N., Brown, S., Sienz, J., Lavery, N. The three-prong method: a novel assessment of residual stress in laser powder bed fusion Virtual and Physical Prototyping 13 1 20 25
  7. Aldoumani, N., Haddad Khodaparast, H., Giannetti, C., Abdallah, Z., Cameron, I., Friswell, M., Sienz, J. A robust design of an innovative shaped rebar system using a novel uncertainty model Structural and Multidisciplinary Optimization 58 4 1351 1365
  8. Zhang, L., Low, K., Belblidia, F., Sienz, J. Uphill filling system for a bar-like casting Journal of Materials Processing Technology 262 269 276
  9. Molteni, A., Masri, Z., Low, K., Yousef, H., Sienz, J., Fraser, K. Experimental measurement and numerical modelling of dye washout for investigation of blood residence time in ventricular assist devices The International Journal of Artificial Organs 41 4 201 212
  10. Ollar, J., Mortished, C., Jones, R., Sienz, J., Toropov, V. Gradient based hyper-parameter optimisation for well conditioned kriging metamodels Structural and Multidisciplinary Optimization 55 6 2029 2044
  11. Lavery, N., Cherry, J., Mehmood, S., Davies, H., Girling, B., Sackett, E., Brown, S., Sienz, J., Brown, S., Sienz, J., Lavery, N., Davies, H., Sackett, E. Effects of hot isostatic pressing on the elastic modulus and tensile properties of 316L parts made by powder bed laser fusion Materials Science and Engineering: A 693 186 213
  12. Thompson, J., Walton, S., Hassan, O., Rolland, S., Sienz, J. The use of CFD and multi-objective optimisation techniques to customise an industrial pre-mixer Structural and Multidisciplinary Optimization
  13. D’Onofrio, C., van Loon, R., Rolland, S., Johnston, R., North, L., Brown, S., Phillips, R., Sienz, J., Sienz, J., Johnston, R., van Loon, R., Rolland, S., D'Onofrio, C. Three-dimensional computational model of a blood oxygenator reconstructed from micro-CT scans Medical Engineering & Physics
  14. Khodaparast, H., Govers, Y., Dayyani, I., Adhikari, S., Link, M., Friswell, M., Mottershead, J., Sienz, J., Sienz, J., Friswell, M., Adhikari, S., Haddad Khodaparast, H. Fuzzy finite element model updating of the DLR AIRMOD test structure Applied Mathematical Modelling 52 512 526
  15. Zhang, L., Deng, A., Cameron, I., Wang, E., Sienz, J. Parametric investigation on an industrial electromagnetic continuous casting mould performance Journal of Computational Design and Engineering 4 4 256 262
  16. Low, K., van Loon, R., Rolland, S., Sienz, J., Rolland, S. Formulation of Generalized Mass Transfer Correlations for Blood Oxygenator Design Journal of Biomechanical Engineering 139 3 031007
  17. James, D., Belblidia, F., Eckermann, J., Sienz, J. An innovative photogrammetry color segmentation based technique as an alternative approach to 3D scanning for reverse engineering design Computer-Aided Design and Applications 14 1 1 16
  18. Sienz, J., van Loon, R. Pore-Scale Modeling of Non-Newtonian Shear-Thinning Fluids in Blood Oxygenator Design Journal of Biomechanical Engineering 138 5 051001
  19. Morgan, H., Cherry, J., Jonnalagadda, S., Ewing, D., Sienz, J., Sienz, J. Part orientation optimisation for the additive layer manufacture of metal components The International Journal of Advanced Manufacturing Technology
  20. Huszar, M., Belblidia, F., Alston, S., Wlodarski, P., Arnold, C., Bould, D., Sienz, J. The influence of flow and thermal properties on injection pressure and cooling time prediction Applied Mathematical Modelling
  21. Aldoumani, N., Haddad Khodaparast, H., Cameron, I., Friswell, M., Jones, D., Chandrashaker, A., Sienz, J., Meng, W. The robustness of carbon fibre members bonded to aluminium connectors in aerial delivery systems Cogent Engineering 3 1
  22. Matallah, H., Newton, W., James, D., Cameron, I., Sienz, J., Romocki, S., Lavery, N. The development of a sub-atmospheric two-phase thermosyphon natural gas preheater using a lumped capacitance model and comparison with experimental results Applied Thermal Engineering 104 767 778
  23. Thompson, J., Hassan, O., Rolland, S., Sienz, J. The identification of an accurate simulation approach to predict the effect of operational parameters on the particle size distribution (PSD) of powders produced by an industrial close-coupled gas atomiser Powder Technology 291 75 85
  24. Zhang, L., Deng, A., Wang, E., Sienz, J. An Experimental Investigation to Facilitate an Improvement in the Design of an Electromagnetic Continuous Casting Mould Processes 4 2 14
  25. Innocente, M., Afonso, S., Sienz, J., Davies, H. Particle swarm algorithm with adaptive constraint handling and integrated surrogate model for the management of petroleum fields Applied Soft Computing 34 463 484
  26. Huszar, M., Belblidia, F., Davies, H., Arnold, C., Bould, D., Sienz, J. Sustainable injection moulding: The impact of materials selection and gate location on part warpage and injection pressure Sustainable Materials and Technologies 5 1 8
  27. Zhang, L., Belblidia, F., Cameron, I., Sienz, J., Boat, M., Pearson, N. Influence of Specimen Velocity on the Leakage Signal in Magnetic Flux Leakage Type Nondestructive Testing Journal of Nondestructive Evaluation 34 2
  28. Cherry, J., Davies, H., Mehmood, S., Lavery, N., Brown, S., Sienz, J., Brown, S., Sienz, J., Lavery, N., Davies, H. Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting The International Journal of Advanced Manufacturing Technology 76 5-8 869 879
  29. Giannetti, C., Ransing, R., Ransing, M., Bould, D., Gethin, D., Sienz, J. A novel variable selection approach based on co-linearity index to discover optimal process settings by analysing mixed data Computers & Industrial Engineering 72 217 229
  30. Newton, W., Lewis, M., Carswell, D., Lavery, N., Evans, B., Bould, D., Sienz, J., Evans, B. Investigating the thermal profile of a marine vessel engine room through simulation with field measurements Applied Thermal Engineering 73 1 1360 1370
  31. Eckermann, J., Mehmood, S., Davies, H., Lavery, N., Brown, S., Sienz, J., Jones, A., Sommerfeld, P., Brown, S., Sienz, J., Lavery, N., Davies, H. Computational modeling of creep-based fatigue as a means of selecting lead-free solder alloys Microelectronics Reliability 54 6-7 1235 1242
  32. Luege, M., Orlando, A., Sienz, J. A finite strain contact model for mixed lubricated surfaces in forming processes Applied Mathematical Modelling 37 24 9985 10006
  33. Chandra, Y., Scarpa, F., Chowdhury, R., Adhikari, S., Sienz, J., Sienz, J., Adhikari, S. Multiscale hybrid atomistic-FE approach for the nonlinear tensile behaviour of graphene nanocomposites Composites Part A: Applied Science and Manufacturing 46 147
  34. Fuerle, F., Sienz, J. Decomposed surrogate based optimization of carbon-fiber bicycle frames using Optimum Latin Hypercubes for constrained design spaces Computers & Structures 119 48
  35. Murmu, T., Sienz, J., Adhikari, S., Arnold, C., Arnold, C., Sienz, J., Adhikari, S. Nonlocal buckling of double-nanoplate-systems under biaxial compression Composites Part B: Engineering 44 1 84 94
  36. Flores, E., DiazDelaO, F., Friswell, M., Sienz, J., Sienz, J., Friswell, M. A computational multi-scale approach for the stochastic mechanical response of foam-filled honeycomb cores Composite Structures 94 5 1861 1870
  37. Sienz, J. Optimization-driven design of dies for profile extrusion: Parameterization, strategy, and performance Polymer Engineering & Science
  38. J.F.T., P., Ettinger, H., Sienz, J., Sienz, J. Computerized optimization substantially reduces profile extrusion die design time Plastics Research Online
  39. Chandra, Y., Chowdhury, R., Scarpa, F., Adhikari, S., Sienz, J., Arnold, C., Murmu, T., Bould, D., Arnold, C., Sienz, J., Adhikari, S. Vibration frequency of graphene based composites: A multiscale approach Materials Science and Engineering: B 177 3 303 310
  40. Sienz, J. Quantified Surface Improvement Using Temperature Cycle Injection Moulding International Polymer Processing The Journal of the Polymer Processing Society
  41. Sienz, J. Formulation of the Audze–Eglais uniform Latin hypercube design of experiments for constrained design spaces Advances in Engineering Software
  42. Murmu, T., Sienz, J., Adhikari, S., Arnold, C., Arnold, C., Sienz, J., Adhikari, S. Nonlocal buckling behavior of bonded double-nanoplate-systems Journal of Applied Physics 110 8 084316
  43. Sienz, J., Goublomme, A., Luege, M., Sienz, J. Sensitivity analysis for the design of profile extrusion dies Computers & Structures 88 9-10 610 624
  44. Sienz, J. Finite element analysis of the middle ear transfer functions and related pathologies Medical Engineering & Physics
  45. Sienz, J. Converging flow inline rheometry for engineering extensional viscosity of uPVC Plastics, Rubber and Composites
  46. Sienz, J. Water assisted injection moulding: development of insights and predictive capabilities through experiments on instrumented process in parallel with computer simulations Plastics, Rubber and Composites
  47. Polynkin, A., J.F.T., P., Sienz, J., Sienz, J. Gas Assisted Injection Molding of an Industrial Part: 3D Simulation Provides Virtual Molding Trials International Polymer Processing 2007 02 173 178
  48. Ettinger, H., Sienz, J., Pittman, J., Polynkin, A., Sienz, J. Parameterization and optimization strategies for the automated design of uPVC profile extrusion dies 180 194
  49. Polynkin, A., Pittman, J., Sienz, J., Sienz, J. Gas displacing liquids from tubes: high capillary number flow of a power law liquid including inertia effects 2969 2982
  50. Bates, S., Sienz, J., Langley, D., Sienz, J. Formulation of the Audze-Eglais Uniform Latin Hypercube design of experiments 493 506

Conference Contributions

  1. Lavery, N., Sienz, J. The influence of powder ageing characteristics on 316l stainless steel processed by laser based powder bed fusion Proceedings Euro PM 2017: International Powder Metallurgy Congress and Exhibition