Publications

Journal Articles

  1. Al-Salem, S., Behbehani, M., Al-Hazza’a, A., Arnold, J., Alston, S., Al-Rowaih, A., Asiri, F., Al-Rowaih, S., Karam, H., Arnold, C., Alston, S. Study of the degradation profile for virgin linear low-density polyethylene (LLDPE) and polyolefin (PO) plastic waste blends Journal of Material Cycles and Waste Management
  2. Korkees, F., Alston, S., Arnold, C. Directional diffusion of moisture into unidirectional carbon fiber/epoxy Composites: Experiments and modeling Polymer Composites
  3. Korkees, F., Arnold, C., Alston, S. Water absorption and low-energy impact and their role in the failure of ±45° carbon fibre composites Polymer Composites
  4. Murmu, T., Sienz, J., Adhikari, S., Arnold, C., Arnold, C., Sienz, J., Adhikari, S. Nonlocal buckling of double-nanoplate-systems under biaxial compression Composites Part B: Engineering 44 1 84 94
  5. James, S., Robinson, A., Arnold, J., Worsley, D., Arnold, C., Worsley, D. The effects of humidity on photodegradation of poly(vinyl chloride) and polyethylene as measured by the CO2 evolution rate Polymer Degradation and Stability 98 2 513
  6. Arnold, J., Alston, S., Korkees, F., Arnold, C., Alston, S., Korkees, F. An assessment of methods to determine the directional moisture diffusion coefficients of composite materials Composites Part A: Applied Science and Manufacturing 55 120 128
  7. Arnold, J., Alston, S., Arnold, C., Alston, S. Life cycle assessment of the production and use of polypropylene tree shelters Journal of Environmental Management 94 1 1 12
  8. Chandra, Y., Chowdhury, R., Scarpa, F., Adhikari, S., Sienz, J., Arnold, C., Murmu, T., Bould, D., Arnold, C., Sienz, J., Adhikari, S. Vibration frequency of graphene based composites: A multiscale approach Materials Science and Engineering: B 177 3 303 310
  9. Arnold, J., Arnold, C., Griffiths, I. The dynamic behavior of squash balls American Journal of Physics
  10. Arnold, J., Arnold, C., Alston, S. Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 1: Experimental Pyrolysis Data Environmental Science & Technology 45 21
  11. Alston, S., Arnold, J., Arnold, C. Environmental Impact of Pyrolysis of Mixed WEEE Plastics Part 2: Life Cycle Assessment Environmental Science & Technology 45 21 9386 9392
  12. Murmu, T., Sienz, J., Adhikari, S., Arnold, C., Arnold, C., Sienz, J., Adhikari, S. Nonlocal buckling behavior of bonded double-nanoplate-systems Journal of Applied Physics 110 8 084316
  13. Arnold, J., Arnold, C. A free-volume hole-filling model for the solubility of liquid molecules in glassy polymers 1: Model derivation European Polymer Journal 46 5 1131 1140
  14. Arnold, J., Arnold, C. A free-volume hole-filling model for the solubility of liquid molecules in glassy polymers 2: Experimental validation European Polymer Journal
  15. Arnold, J., Arnold, C., Alston, S., Watson, T., Carnie, M. The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics Polymer Testing
  16. Arnold, J., Arnold, C. Influence of production parameters on surface energy of tinplate Ironmaking & Steelmaking
  17. Arnold, J., Alston, S., Holder, A., Arnold, C., Alston, S. Void formation due to gas evolution during the recycling of Acrylonitrile–Butadiene–Styrene copolymer (ABS) from waste electrical and electronic equipment (WEEE) Polymer Degradation and Stability 94 4 693 700
  18. Arnold, J., O'Brien, F., Moody, M., Arnold, C. All Polymer Composites from Recycled Woven Polypropylene Fabrics and Polyethylene Film 1523 1529
  19. Brennan, L., Isaac, D., Arnold, J., Arnold, C. Recycling of Acrylonitrile-Butadiene-Styrene and High Impact Polystrene from Waste Computer Equipment 572 578
  20. Arnold, J., Venditti, N., Arnold, C. The Effects of Environment on the Creep Properties of a PEMA based Bone Cement 707 717

Book Chapters

  1. Arnold, J., Arnold, C. Environmental Effects on Crack Growth in Composites (Ed.), Comprehensive Structural Integrity 470
  2. Arnold, J., Arnold, C. Environmental Effects on Crack Growth in Polymers (Ed.), Comprehensive Structural Integrity 319

Conference Contributions

  1. Holland, P., Davies, P., Arnold, C., Hilaireau, N., Ennser, K., Cahill, S., Hainke, M., Leon, J., Alves, M., Ennser, K. ACTIVE CLASSROOMS ENABLING REGIONAL, NATIONAL AND GLOBAL COLLABORATION ICERI2019 Proceedings 7691 7699
  2. Huszar, M., Belblidia, F., Arnold, J., Bould, D., Sienz, H., Arnold, C. An exploration of core misalignment, shifting and deflection phenomena through thickness measurements on thin-walled injection moulded bins Sustainable Design and Manufacturing (SDM) Conference, Cardiff 28-30 April, 2014.
  3. Alexander, R., Arnold, J., Alston, S., Searle, J., Arnold, C. Thermal Analysis as a Tool for Assessing the Degradation of PVC-coated Constructional Steel. International Conference & Exhibition on Advanced & Nano Materials. Calgary, Canada.
  4. Mehmood, S., Sienz, H., Lavery, N., Alston, S., Arnold, J., Arnold, C. Studying Microstructure and Crystallinity of Polypropylene in an Injection Moulded Medical Bin Lid. In Kess International Sustainable Design and Manufacturing. Cardiff, Wales.
  5. Arnold, J., Twist, B., Jones, R., Khan, N., Arnold, C. Bonded Repair of CFRP Primary Structure: testing and analysis of bonded scarf joints Proceedings of the 15th European Conference on Composite Materials
  6. Arnold, J., Alston, S., Korkees, F., Arnold, C. The Long-Term Water Absorption and Desorption Behaviour of Carbon-fibre / Epoxy Composites Proceedings of the 15th European Conference on Composite Materials,
  7. Arnold, J., Alston, S., Korkees, F., Arnold, C. Finite element modelling of moisture uptake in carbon fibre / epoxy composites: a multi-scale approach Proceedings of the 15th European Conference on Composite Materials,