Publications

Journal Articles

  1. Potts, S., Phillips, C., Jewell, E., Clifford, B., Lau, Y., Claypole, T. High-speed imaging the effect of snap-off distance and squeegee speed on the ink transfer mechanism of screen-printed carbon pastes Journal of Coatings Technology and Research
  2. Melvin, C., Jewell, E., Miedema, J., Lammers, K., Vooys, A., Allman, A., McMurray, N., McMurray, H. Identifying interlayer surface adhesion failure mechanisms in tinplate packaging steels Packaging Technology and Science
  3. Burkitt, D., Greenwood, P., Hooper, K., Richards, D., Stoichkov, V., Beynon, D., Jewell, E., Watson, T. Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells MRS Advances 1 9
  4. Abbas, B., Mohammad, Y., Jewell, E., Searle, J., Mouhamad, Y. Thermal sintering of printable copper for enhanced conductivity of FTO coated glass substrates Journal of Materials Science: Materials in Electronics 30 22 19917 19927
  5. Mouhamad, Y., Meroni, S., Rossi, F., Baker, J., Watson, T., Searle, J., Jewell, E., Jewell, E., Searle, J., Watson, T., Baker, J. Geometrical optimization for high efficiency carbon perovskite modules Solar Energy 187 129 136
  6. Allman, A., Jewell, E., Vooys, A., Hayes, R., McMurray, H. Food packaging simulant failure mechanisms in next generation steel packaging Packaging Technology and Science
  7. Sutton, R., Jewell, E., Elvins, J., Searle, J., Jones, P., Jewell, E., Searle, J., Elvins, J. Characterising the discharge cycle of CaCl 2 and LiNO 3 hydrated salts within a vermiculite composite scaffold for thermochemical storage Energy and Buildings 162 109 120
  8. Meroni, S., Mouhamad, Y., De Rossi, F., Pockett, A., Baker, J., Escalante, R., Searle, J., Carnie, M., Jewell, E., Oskam, G., Watson, T., Baker, J. Homogeneous and highly controlled deposition of low viscosity inks and application on fully printable perovskite solar cells Science and Technology of Advanced Materials 19 1 1 9
  9. Sutton, R., Jewell, E., Searle, J., Elvins, J., Jewell, E., Searle, J., Elvins, J. Discharge performance of blended salt in matrix materials for low enthalpy thermochemical storage Applied Thermal Engineering 145 483 493
  10. Melvin, C., Jewell, E., de Vooys, A., Lammers, K., Murray, N. Surface and Adhesion Characteristics of Current and Next Generation Steel Packaging Materials Journal of Packaging Technology and Research
  11. De Rossi, F., Baker, J., Beynon, D., Hooper, K., Meroni, S., Williams, D., Wei, Z., Yasin, A., Charbonneau, C., Jewell, E., Watson, T. All Printable Perovskite Solar Modules with 198 cm2 Active Area and Over 6% Efficiency Advanced Materials Technologies 1800156
  12. Allman, A., Jewell, E., de Vooys, A., Hayes, R. Inter-layer Adhesion Performance of Steel Packaging Materials for Food Cans Under Retort Conditions Journal of Packaging Technology and Research
  13. Jewell, E., Claypole, T., Gethin, D. Dadansoddiad o berfformiad lampau electroymoleuol printiedig ar is-haen ddi-draidd Gwerddon 25 30 44
  14. Troughton, J., Carnie, M., Davies, M., Charbonneau, C., Jewell, E., Worsley, D., Watson, T. Photonic flash-annealing of lead halide perovskite solar cells in 1 ms J. Mater. Chem. A 4 9 3471 3476
  15. Philip, B., Jewell, E., Worsley, D. The impact of solvent characteristics on performance and process stability of printed carbon resistive materials Journal of Coatings Technology and Research 13 5 911 920
  16. Charbonneau, C., Cameron, P., Pockett, A., Lewis, A., Troughton, J., Jewell, E., Worsley, D., Watson, T. Solution processing of TiO2 compact layers for 3rd generation photovoltaics Ceramics International 42 10 11989 11997
  17. Jewell, E., Philip, B., Greenwood, P. Improved Manufacturing Performance of Screen Printed Carbon Electrodes through Material Formulation Biosensors 6 3 30
  18. Philip, B., Jewell, E., Greenwood, P., Weirman, C. Material and process optimization screen printing carbon graphite pastes for mass production of heating elements Journal of Manufacturing Processes 22 185 191
  19. Jewell, E., Hamblyn, S., Claypole, T., Gethin, D., Claypole, T. Deposition of High Conductivity Low Silver Content Materials by Screen Printing Coatings 5 2 172 185
  20. Jewell, E. Room Temperature Laminate Technology for Increased Performance in Printed Electroluminescent Devices on Aluminium Substrates J. PRINT MEDIA TECHNOL. RES
  21. Jewell, E., Gethin, D., Claypole, T., Jewell, E. The impact of carbon content and mesh on the characteristics of screen printed conductive structures Circuit World 39 1 13
  22. Tudor Gethin, D., Huw Jewell, E., Charles Claypole, T., Jewell, E. Printed silver circuits for FMCG packaging Circuit World 39 4 188 194
  23. Jewell, E. A multi colour separation system for graphic images Journal of Print Media Technology and Research. 1 4
  24. Gethin, D., Claypole, T., Jewell, E. Experimental and numerical investigation into nonlinear deformation of silicone rubber pads during ink transfer process Polymer Testing
  25. Gethin, D., Claypole, T., Jewell, E., Phillips, C. Development of measurement techniques to characterize the optical properties of transparent films with application in in-mould decoration Measurement Science and Technology
  26. Jewell, E. The influence of squeegee parameters on ink deposit in UV halftone screen printing TAGA Journal. 3 2
  27. Jewell, E., Claypole, T. “The potential for using colour profiling for UV graphic screen printing” Journal of the Technical association of the graphic arts, 2 2 29 2006
  28. Jewell, E., Claypole, T., Gethin, D., Jewell, E. The effect of exposure to inks and solvents on squeegee performance Surface Coatings International Part B: Coatings Transactions 87 4 253 260
  29. Jewell, E., Claypole, T., Gethin, D., Jewell, E. Viscosity control in the screen printing of ceramic transfers Surface Coatings International Part B: Coatings Transactions 86 2 155 163
  30. Anderson, J., Gethin, D., Claypole, T., Jewell, E., Bohan, M., Korchkina, T. Hydrodynamic interactions in the screen printing process J. Prepress & Printing Technology 1 2 10 17
  31. Korchkina, T., Jewell, E., Claypole, T., Gethin, D., Bohan, M. Two-Dimensional Simulation of the Transfer Pad in Pad Printing Journal of the Technical association of the graphic arts
  32. Hamblyn, S., Jewell, E., Claypole, T., Gethin, D., Jewell, E. An investigation into screen printing using UV process colour inks Surface Coatings International Part B: Coatings Transactions 85 2 95 104

Conference Contributions

  1. Jewell, E. Investigation of paint misses at the coil coating line using rheological methods
  2. Mugabo, S., Jewell, E., Searle , J., Rosseau,, J. Investigation of paint misses at the coil coating line using rheological methods”, 3rd International conference on rheology and modelling of materials Miskolc-Lillafüred, Hungary, 2-6 October, 2017. 3rd International conference on rheology and modelling of materials Miskolc-Lillafüred, Hungary
  3. Meroni, S., De Rossi, F., Pockett, A., T. De Brito Melo, T., Searle, J., Escalante, R., Baker, J., Mouhamad, Y., Jewell, E., Carnie, M., Oskam, G., Watson, T. Novel Deposition Method to Print Binder-Free Inks on Large Scale Carbon Perovskite Solar Cells PV-SAT 13, Bangor April 2017
  4. Sutton, R., Jewell, E., Searle, J., Elvins, J. Characterising the discharge properties of a thermochemical storage system via the hydration of chemical salts Sustainable Energy Technology (SET2016),
  5. Sutton, R., Elvins, J., Casey, S., Jewell, E., Searle, J. Material selection and characterisation for thermochemical storage
  6. Cotella, ., Baker, J., Jewell, E., Watson, T. Substrate-solvent interactions to ensure homogeneous deposition of perovskite for large area high efficiency solar cells
  7. Sutton, R., Elvins, J., Casey, S., Jewell, E., Searle, J. The optimisation of salt impregnated matrices as potential thermochemical storage materials
  8. Jewell, E., Mabbett, I., Searle, J. NIR sintering for rapid processing of metallic conducting circuits
  9. Claypole, T., Bould, D., Jewell, E. Effect of flexographic press parameters on the reproduction of colour images Proceedings of IARIGAI XXXIX
  10. Petersen, I., Hübner, G., Claypole, T., Jewell, E. Influence and interaction phenomena of screen printing machine settings on surface roughness Proceedings of IARIGAI XXXVIII
  11. Claypole, T., Bould, D., Hall, R., Jewell, E., Gethin, D., Jewell, E. Flexo printing of fine lines Proceedings of the Technical Association of the Graphic Arts, TAGA
  12. Claypole, T., Jewell, E., Wells, N., Casey, P., Jewell, E. Influence of paper and ink combination on the physical characteristics of newsprint Proceedings of the Technical Association of the Graphic Arts, TAGA
  13. Cherrington, M., Claypole, T., Jewell, E., Jewell, E. Printing technologies for photovoltaic coatings on steel EUROCORR 2008 - European Corrosion Congress: Managing Corrosion for Sustainability, Book of Abstracts
  14. Jewell, E., Claypole, T., Roberts, S., Bould, D. The impact of conductive carbon properties on print performance Proceedings of IARIGAI XXXV
  15. Claypole, T., Jewell, E., Wells, N., Casey, P. Influence of paper and printing process on the visual perception and colorimetric characteristics of newsprint Proceedings of IARIGAI XXXIV
  16. Jewell, E., Claypole, T., Palmer, B. The development of six colour separation algorithms Proceedings of IARIGAI XXXIV
  17. Jewell, E., Claypole, T., Davies, G., Jewell, E. Print line quality in the gravure process Proceedings of the Technical Association of the Graphic Arts, TAGA 2006
  18. Jewell, E., Claypole, T., Gethin, D. A parametric study of cylinder press screen printing Proceedings of IARIGAI XXXIII
  19. Ray, W., Claypole, T., Jewell, E. Printing as an Industrial Process: Manufacturing Emissive Displays Proceedings of the Technical Association of the Graphic Arts, TAGA 2006
  20. Jewell, E., Wells, N., Claypole, T., Jewell, E. A study of maintenance practice in the printing industry Proceedings of the Technical Association of the Graphic Arts, TAGA 2005
  21. Jewell, E., Claypole, T., Gethin, D., Jewell, E. Two- and three-dimensional characterization of screen-printed lines Proceedings of the Technical Association of the Graphic Arts, TAGA 2005
  22. Jewell, E., Claypole, T., Wilcox, M. The development of a six colour ink system for enhanced colour gamut Proceedings of IARIGAI XXXII
  23. Claypole, T., Davies, G., Jewell, E., Vigne, V. The effect of speed and viscosity on line quality in rotogravure printing with reference to printed electronics Proceedings of IARIGAI XXXII
  24. Claypole, T., Davies, G., Jewell, E., Vigne, V. The effect of speed and viscosity on line quality in rotogravure printing TAGA / IMAPS conference “Printing an Intelligent Future” Symposium
  25. Jewell, E., Claypole, T., Gethin, D. Characterisation methods for printed thin film electronics
  26. Claypole, T., Gethin, D., Jewell, E., Jewell, E. Micro-electronic printing: The state of the art, current research activities and the future potential Proceedings of the Technical Association of the Graphic Arts, TAGA
  27. Claypole, T., Jewell, E., Ray, W., Berri, Y., Jewell, E. Printing of conducting inks on paper Proceedings of the Technical Association of the Graphic Arts, TAGA
  28. Korochkina, T., Brame, P., Jewell, E., Claypole, T., Gethin, D., Jewell, E. Process stability in five-colour pad printing of contact lenses Proceedings of the Technical Association of the Graphic Arts, TAGA
  29. Jewell, E., Barden, T., Claypole, T., Gethin, D., Jewell, E. Characterisation of Fine Lines Proceedings of the Technical Association of the Graphic Arts, TAGA
  30. Phillips, C., Jewell, E., Claypole, T., Gethin, D., Jewell, E. The Optical Properties of IMD Film Proceedings of the Technical Association of the Graphic Arts, TAGA 2003 78 79
  31. Claypole, T., Fox, I., Gethin, D., Jewell, E. Improving the speed and resolution of screen printing for industrial applications Proceedings of the Technical Association of the Graphic Arts, TAGA 2003
  32. Jewell, E., Claypole, T., Gethin, D. The impact of ink rheology on the image transfer mechanism in screen printing Proceedings of Institute of Non Newtonian fluid mechanics, Conference on rheology, Miskin manor April 2003
  33. Korchkina, T., Jewell, E., Claypole, T., Gethin, D., Bohan, M. Two-Dimensional Simulation of the Transfer Pad in Pad Printing Proceedings of the Technical Association of the Graphic Arts, TAGA 2003
  34. Jewell, E., Claypole, T., Von Grol, M., Bohan, M. Modelling the flow in a flexographic ink chamber 52nd Proceedings of the Technical Association of the Graphic Arts, TAGA 2000
  35. Claypole, T., Bohan, M., Jewell, E., Gethin, D. Optimisation of Printing Processes using Dynamic Analysis, Proceedings of TAGA 1999 1 375 388
  36. Bohan, M., Claypole, T., Anderson, J., Jewell, E., Gethin, D., Jewell, E. Use of orthogonal array techniques in printing research Proceedings of the International Printing and Graphic Arts Conference
  37. Jewell, E., Claypole, T., Gethin, D. Development of a system for the prediction of screen printed halftone densities Proceedings of the Technical Association of the Graphic Arts, TAGA 1998 1
  38. Jewell, E., Claypole, T., Appleton, W., Gethin, D. Distortion of the image by the screen printing process Proceedings of the Technical Association of the Graphic Arts, TAGA 1996
  39. Jewell, E., Claypole, T., Appleton, W. The application of orthogonal array analysis to the screen printing process