Dr Eifion Jewell
Associate Professor
Engineering
Telephone: (01792) 604901
Room: Academic Office - A229
Second Floor
Engineering East
Bay Campus

Publications

  1. Abbas, B., Mohammad, Y., Jewell, E., Searle, J., Mouhamad, Y. Thermal sintering of printable copper for enhanced conductivity of FTO coated glass substrates Journal of Materials Science: Materials in Electronics 30 22 19917 19927
  2. Allman, A., Jewell, E., Vooys, A., Hayes, R., McMurray, H. Food packaging simulant failure mechanisms in next generation steel packaging Packaging Technology and Science
  3. Melvin, C., Jewell, E., Miedema, J., Lammers, K., Vooys, A., Allman, A., McMurray, N., McMurray, H. Identifying interlayer surface adhesion failure mechanisms in tinplate packaging steels Packaging Technology and Science
  4. Burkitt, D., Greenwood, P., Hooper, K., Richards, D., Stoichkov, V., Beynon, D., Jewell, E., Watson, T. Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells MRS Advances 1 9
  5. Sutton, R., Jewell, E., Searle, J., Elvins, J., Jewell, E., Searle, J., Elvins, J. Discharge performance of blended salt in matrix materials for low enthalpy thermochemical storage Applied Thermal Engineering 145 483 493

See more...

Teaching

  • EGA334 Mechanical Engineering Design 3

    This module demonstrates the outcomes of three years of learning and applies multiple skills to a design project. The project will show that students can manage and deliver a design task, as a team, through all stages of the design process. Students should progress from specification to concept design, undertake analysis (using computer tools as appropriate) and produce a design report and assembly drawings.

  • EGSM06 Deposition of functional materials by printing and coating

    Provide overview of coating processes that are applicable for the deposition of functional coatings and to provide an understanding of their capabilities and commercial maturity. This module will provide students with an appreciation and knowledge to address up-scaling of laboratory printing and coating processes to a commercial scale.

Supervision

  • Application of perovskite solar cells onto flexible steel substrates (current)

    Student name:
    EngD
    Other supervisor: Prof Trystan Watson
  • Development of a solution processed transparent top contact for a perovskite solar cell on steel (current)

    Student name:
    EngD
    Other supervisor: Prof Trystan Watson
  • Development of sensors and non-destructive analysis to determine the performance of coatings in construction (current)

    Student name:
    EngD
    Other supervisor: Prof Hamilton Mcmurray
  • The adhesion of polyester to novel tinplate REACH compliant steel. (current)

    Student name:
    EngD
    Other supervisor: Dr David Warren
  • Surface texture and visual appearance of packaging steels (current)

    Student name:
    EngD
    Other supervisor: Dr Will Harrison
  • Chrome-free passivation for tinplate (current)

    Student name:
    EngD
    Other supervisor: Prof Hamilton Mcmurray
  • Process and Materials effect in organic coating of architectural steels (current)

    Student name:
    EngD
    Other supervisor: Prof David Worsley
  • Understanding and Improving the Post Retort Adhesion of BPANI Lacquers on Cr (III) Electroplated Steel (current)

    Student name:
    EngD
    Other supervisor: Prof Hamilton Mcmurray
  • Brand protection for steel packaging products (current)

    Student name:
    EngD
    Other supervisor: Prof Davide Deganello
  • The Influence of the Manufacturing Environment on the Performance of Printed Perovskite Solar Cells (current)

    Student name:
    PhD
    Other supervisor: Prof Trystan Watson
  • Development of a fluid dynamic for electrospray coating applications (current)

    Student name:
    EngD
    Other supervisor: Dr Christopher Phillips
  • Multispectral manufacturing: Making light work of steel processing (current)

    Student name:
    PhD
    Other supervisor: Prof Trystan Watson
  • Roll to Roll Processing of Perovskite Solar Cells (current)

    Student name:
    PhD
    Other supervisor: Prof Trystan Watson
  • Developing cheap thin film printed solar cell (current)

    Student name:
    PhD
    Other supervisor: Prof Trystan Watson
  • Characterisation of Sustainable Materials for can making (current)

    Student name:
    EngD
    Other supervisor: Dr Natalie Wint
  • '''Processing of nano copper materials for the production of conductive circuits''' (current)

    Student name:
    PhD
    Other supervisor: Dr Justin Searle
  • Re-use of Industrial Waste Heat Utilising Thermochemical Materials (current)

    Student name:
    EngD
    Other supervisor: Dr Jonathon Elvins
  • Development of scale-up of fully printable perovskite solar modules (current)

    Student name:
    PhD
    Other supervisor: Prof Trystan Watson
  • Optimisation of thermally driven building cooling system. (current)

    Student name:
    EngD
    Other supervisor: Dr Jonathon Elvins
  • No title yet. (current)

    Student name:
    EngD
    Other supervisor: Dr Justin Searle
  • 'Development of a thermochemical system for the long-term storage of low grade heat from renewable sources' (awarded 2018)

    Student name:
    EngD
    Other supervisor: Dr Justin Searle
  • 'Packaging Materials' (awarded 2017)

    Student name:
    EngD
    Other supervisor: Prof Hamilton Mcmurray