Dr Eifion Jewell
Associate Professor
Engineering
Ffon: (01792) 604901
Ystafell: Swyddfa Academaidd - A229
Ail lawr
Adeilad Dwyreinol Peirianneg
Campws y Bae

Cyhoeddiadau

  1. Abbas, B., Mohammad, Y., Jewell, E., Searle, J., Mouhamad, Y. Thermal sintering of printable copper for enhanced conductivity of FTO coated glass substrates Journal of Materials Science: Materials in Electronics 30 22 19917 19927
  2. Allman, A., Jewell, E., Vooys, A., Hayes, R., McMurray, H. Food packaging simulant failure mechanisms in next generation steel packaging Packaging Technology and Science
  3. Melvin, C., Jewell, E., Miedema, J., Lammers, K., Vooys, A., Allman, A., McMurray, N., McMurray, H. Identifying interlayer surface adhesion failure mechanisms in tinplate packaging steels Packaging Technology and Science
  4. Burkitt, D., Greenwood, P., Hooper, K., Richards, D., Stoichkov, V., Beynon, D., Jewell, E., Watson, T. Meniscus Guide Slot-Die Coating For Roll-to-Roll Perovskite Solar Cells MRS Advances 1 9
  5. Sutton, R., Jewell, E., Searle, J., Elvins, J., Jewell, E., Searle, J., Elvins, J. Discharge performance of blended salt in matrix materials for low enthalpy thermochemical storage Applied Thermal Engineering 145 483 493

Gweld mwy...

Addysgu

  • EGA334 Mechanical Engineering Design 3

    This module demonstrates the outcomes of three years of learning and applies multiple skills to a design project. The project will show that students can manage and deliver a design task, as a team, through all stages of the design process. Students should progress from specification to concept design, undertake analysis (using computer tools as appropriate) and produce a design report and assembly drawings.

  • EGSM06 Deposition of functional materials by printing and coating

    Provide overview of coating processes that are applicable for the deposition of functional coatings and to provide an understanding of their capabilities and commercial maturity. This module will provide students with an appreciation and knowledge to address up-scaling of laboratory printing and coating processes to a commercial scale.

Goruchwyliaeth

  • Application of perovskite solar cells onto flexible steel substrates (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Trystan Watson
  • Development of a solution processed transparent top contact for a perovskite solar cell on steel (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Trystan Watson
  • Development of sensors and non-destructive analysis to determine the performance of coatings in construction (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Hamilton Mcmurray
  • Surface texture and visual appearance of packaging steels (cyfredol)

    EngD
    Goruchwyliwr arall: Dr Will Harrison
  • Chrome-free passivation for tinplate (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Hamilton Mcmurray
  • Process and Materials effect in organic coating of architectural steels (cyfredol)

    EngD
    Goruchwyliwr arall: Prof David Worsley
  • Understanding and Improving the Post Retort Adhesion of BPANI Lacquers on Cr (III) Electroplated Steel (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Hamilton Mcmurray
  • Brand protection for steel packaging products (cyfredol)

    EngD
    Goruchwyliwr arall: Prof Davide Deganello
  • The Influence of the Manufacturing Environment on the Performance of Printed Perovskite Solar Cells (cyfredol)

    PhD
    Goruchwyliwr arall: Prof Trystan Watson
  • The adhesion of polyester to novel tinplate REACH compliant steel. (cyfredol)

    EngD
    Goruchwyliwr arall: Dr David Warren
  • Multispectral manufacturing: Making light work of steel processing (cyfredol)

    PhD
    Goruchwyliwr arall: Prof Trystan Watson
  • Roll to Roll Processing of Perovskite Solar Cells (cyfredol)

    PhD
    Goruchwyliwr arall: Prof Trystan Watson
  • Developing cheap thin film printed solar cell (cyfredol)

    PhD
    Goruchwyliwr arall: Prof Trystan Watson
  • Development of a fluid dynamic for electrospray coating applications (cyfredol)

    EngD
    Goruchwyliwr arall: Dr Christopher Phillips
  • '''Processing of nano copper materials for the production of conductive circuits''' (cyfredol)

    PhD
    Goruchwyliwr arall: Dr Justin Searle
  • Characterisation of Sustainable Materials for can making (cyfredol)

    EngD
    Goruchwyliwr arall: Dr Natalie Wint
  • Development of scale-up of fully printable perovskite solar modules (cyfredol)

    PhD
    Goruchwyliwr arall: Prof Trystan Watson
  • Re-use of Industrial Waste Heat Utilising Thermochemical Materials (cyfredol)

    EngD
    Goruchwyliwr arall: Dr Jonathon Elvins
  • Optimisation of thermally driven building cooling system. (cyfredol)

    EngD
    Goruchwyliwr arall: Dr Jonathon Elvins
  • 'Development of a thermochemical system for the long-term storage of low grade heat from renewable sources' (dyfarnwyd 2018)

    EngD
    Goruchwyliwr arall: Dr Justin Searle
  • 'Packaging Materials' (dyfarnwyd 2017)

    EngD
    Goruchwyliwr arall: Prof Hamilton Mcmurray