How to connect your Apple device to eduroam

Below are instructions on how to connect your Apple device to the eduroam wireless network. Please ensure that you are connected to the SwanseaUni-setup wireless network when following the instructions relevant to your device.  Please register your device here before following our instructions to connect to our Wi-Fi network.

Apple Wi-Fi Setup on eduroam

eduroam Mac OSX

How to connect your MAC to eduroam

The wireless service enables members of the University to connect to the University network and the Internet using their own computers and devices at various locations around the University and Halls of residence. This guide contains instructions to connect a computer to the eduroam wireless service.

 

How to configure Mac OSX Video (same as Yosemite, Sierra etc)

 

Automatic Setup

To follow these instructions, please ensure you are connected to SwanseaUni-setup.

OSX 10.10,11,12 has the ability to load Wi-Fi settings from a special configuration file. It is important that you are using Safari to view this page and click the link. If you are using another browser you will need to save the file and manualy load it:

  1. The configuration script can be found here: Swansea Lion Mobileconfig script
  2. Once you click the link, you will be prompted to install the profile.
  3. Install it, and enter your username and password. Username: 123456@swansea.ac.uk (your email address)
  4. Password: Your email password
  5. Once installed, you can click the Wi-Fi icon on the top menu bar, then select eduroam from the drop down menu. You should then be connected to eduroam

Manual Setup

If the automatic configuration file does not work you will need to follow the manual instructions.
These can be found here: Manual Yosemite eduroam Instructions

eduroam iPhone/iPad Instructions

How to connect your iPhone/iPad to eduroam

Below are instructions on how to connect your iPhone or iPad to the eduroam wireless network. Please ensure you are reading these instructions from the SwanseaUni-setup wireless network.

Automatic Setup

iPhones have the ability to load enterprise Wi-Fi settings from a special configuration file.

  1. The configuration script can be found here: Swansea iPhone/iPad Mobileconfig script
  2. Once you click the link, you will be prompted to install the profile.
  3. Install it, and enter your username and password. Username: 123456@swansea.ac.uk (your email address)
  4. Password: Your email password
  5. Once installed, you can then connect your Wi-Fi to the eduroam network. You should then be connected to eduroam.

Manual Setup

If the automatic configuration file does not work you will need to follow the manual instructions.
These can be found here: Manual iPhone/iPad eduroam Instructions.